Home > Electromagnetic Compatibility

 

 

Electronic Instrument  Associates has been serving and solving needs in the EMC / EMI community since 1971

We are now offering guaranteed EMC Solutions! 
From "just" the chamber to complete systems integration, including ... training.  

We do the heavy lifting so you won't have to.

We have built and supplied most of the chambers and Systems in the Midwest


 
<<click  here  to  see  a  partial  reference  list>>


What was announced at the International IEEE EMC Symposium July 26th?  See below!!

AE Techron

 

The new 3110 Standards Waveform Generator for Automotive and Aviation standards was proudly on display!  See us for demonstrations, either web or at your facility in August!  
In addition, AE Techron announced the new DSR-100-50 dropout, surge, and ripple test system.  See us for details! 

 

pictures shortly!

ETS-Lindgren

 

ETS-Lindgren presented the following papers at the Symposium: 
-Measurement Uncertainty
-Applications of Reverb
-Automotive Workshops
-Time Domain Systems
-TILE software
-ETSI Testing
-Limits of Symmetry Test Methods for Antennas
-IEEE Standards
-Dielectric Lens (antennas)
-Wireless Workshops
-Calibration of EMC Measurement Solutions
-Emissions RSE
-E Vehicle Testing Solutions
-Immunity antennas
Systems, Systems, Systems - ETS has been doing guaranteed systems now for years, see us  for all system requirements.  We do the heavy lifting so you don't have to.
ETS announced several new probes that interface into our EMCenter.  
The Tile Users Group (TUG) meeting Wednesday morning was completely full of happy TILE users.  Seems no questions from the audience left any Action Items for our staff.  Well done TILE group!

 

 

pictures shortly!

EMSCAN

 

EMSCAN showcased their real-time low-cost desktop chambers that are efficient and cost-effective, eliminate the need for an anechoic chamber for pre-compliance and performance tests and offer accelerated time-to-market at the IEEE EMC in Ottawa between July 26-28. EMSCAN solutions are 1/10th of a chamberfs cost and operate 100 times faster.

The EMxpert family helps you to rapidly diagnose and solve EMC/EMI problems in a single design cycle. It provides unique pre- and post-EMC compliance testing that images real-time emissions. EMSCAN exhibited the worldfs fastest high-resolution EMC scanner, ERX+. With the ERX+ you can diagnose and debug EMC/EMI problems between 150 kHz and 8 GHz with seven different levels of resolution (120 microns - 7.5 mm).

The RFxpert family characterizes antennas without the need for a chamber. It provides far-field patterns, bisections, EIRP and TRP in less than a second. Novel near-field results, including amplitude, polarity and phase give insights into the root causes of antenna performance challenges and help troubleshoot far-field radiation patterns. EMSCAN will provide information about the RFxpert OTA Phantom Head+Hand Test Kit which allows the mobile device manufacturers & wireless service providers to measure TRP of their devices in seconds on their lab-bench

pictures shortly!

Ophir RF

 

Ophir RF had a high interest in some existing power amplifiers like these very popular power amps:
Model 7034, 10kHz to 400MHz, 400 watt!
Model 5265,  0.7GHz to 4.2GHz, 200 watt solid state! This IS the replacement for the problematic TWTA!    One was recently delivered to a local Test Lab in Chicago!  It performs nicely in their anechoic chambers as well as their mode-stirred RF shielded enclosure.  Also they received the new 400 watt, 10kHz to 400MHz power amplifier as well.

 

pictures shortly!

Ophir EMC

 

Ophir EMC presented their new lines of LISN's.  Also a hit is their  OTG116A for MIL-STD 461E/F/G, Section CS116.  One was recently ordered by a local test lab!

 

pictures shortly!

Silent Solutions

 

See us for details for in-house EMC training.

 

pictures shortly!

 

Our company prides itself in offering the EMC Community complete systems as well as training and education to assure you minimum risk when you join our family.

 

See our EMC-Specific page at http://electronicinstrument.com/emchome.htm 

Questions?  Call Frank Krozel at 630-924-1600 or email frank@electronicinstrument.com 

 

For more information contact Frank Krozel.
Electronic Instrument Associates-Central, Inc.